64-Key Expansion Console

The 64-Key Expansion Console adds 64 more programmable feature keys to your station (for a station total of 80).

You program and operate the Console exactly the same as you do the 16 programmable feature keys on your ESI Feature Phone. (See this link for more information.)

To program the console:

Press PROG/HELP 2.
Press the desired programmable feature key.
Dial the digits to program the key.
Confirm the programming by pressing, again, that same programmable feature key.

Notes:

The system will prompt you through steps 2–4 after you perform step 1.

Only one key can exist per extension, feature or operation. If you program a second key for the same extension, feature or operation, this automatically erases the first key so programmed, thus making it available for a new extension, feature or operation.

Hint:

You may find it easier to write in the names on the overlay before you program the keys and attach the overlay to the Console.

Back to top

Back to Feature Phone topics page