Location Keys

For only properly equipped ESI Communications Servers, IVX X-Class systems, and IVX E-Class systems.
If necessary, consult your System Administrator for more details.

Each location in your Esi-Link network has a location number in the range of 700–799. (If necessary, consult your System Administrator to learn your Esi-Link network’s location numbers.) To facilitate dialing into a remote location, you can assign the location number to a programmable feature key — making it a Location Key. When you press a Location Key, you’ll hear dial tone; you can then dial any extension, department, mailbox, or outside line group access code (9, 8, or 71–76) in the remote location. For instance, a user in the Dallas office would press the key programmed for the Chicago office and dial 1 0 4 to reach extension 104 in the Chicago office. You can program up to 12 Location Keys on each 24-Key Feature Phone and up to 30 Location Keys on each 48-Key Feature Phone. (Also, you can program up to 60 Location Keys on a 60-Key Expansion Console.)

Programming a Location Key

1. Hold down the desired programmable feature key for at least two seconds to enter programming mode.
2. Enter the remote location number — such as 7 0 2.

   Note:

   You can also use Location Dex to select the remote location number.

3. Press the feature key again.